Introduction: Outlook Data File Error 0x8004010f

How to Fix Error 0x8004010f is really ordinary with customers of Outlook 2010/2013. It suggests that you have a ruined Outlook profile, and goes with one of two potential mistake messages. Either Outlook data record can’t be gotten to. The action failed. A thing couldn’t be found.

• The perspective slip-up “0x8004010F: Outlook data archive can't be gotten to" is an average error that triggers while sending or receiving email in Outlook 2010 or Outlook 2013.

As a piece of our Server Management Services here at ARZ Host, we help our Customers proficiently separate practically identical Outlook-related errors and resolve them. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, Permit us today to discuss the likely causes and fixes for this error.

How to Fix Error 0x8004010f: Outlook data record can’t be gotten to”?

While sending or receiving messages in Outlook. Customers habitually get an error message as shown underneath. The disengaged coordinator records (OST reports), stores a coordinated copy of all post box records consequently server and helps customers with working detached.

They are routinely disposed to hurts due to different reasons that consolidate degradation due to oversize. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, contamination attack, hurt as a result of accidental or power conclusion, etc.

The fundamental purposes for Outlook error 0x8004010F include:

• OST record is terrible
• Mistaken game plan or savage Outlook profile
• No web or hazardous association connection
• Sending/receiving messages through Shared Mailbox
• Change in the space of OST report on the machine
• Copying of old OST record used by past Outlook structure resulting to updating
• Hurt Outlook program records
• Insufficient read/form approvals
• The fundamental record isn’t set with the fundamental record OST report
• Firewall settings

Want to Export Emails? Check our Article on Exporting Emails from Outlook 365 for Protection.

The best technique to fix viewpoint error “0x8004010F: Outlook data record can’t be gotten to”?

As there is a collection of reasons that trigger the Outlook error 0x8004010F, we will require a purposeful examination method for managing to fix this error. Our Expert Hosting Expert Planners here. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, guides the customers to fix the Outlook arrangement errors at their end.

1: Restart Outlook and Check Internet Connection

Now and again a clear restart helps with settling issues with ventures and structures. Subsequently, we ask customers to restart Outlook or structure and a while later return.

Similarly, investigate the web connection.

2: In reality investigate Account Settings

If a restart didn’t help with fixing the error, we need to guarantee that the record settings are correct. Moreover, guarantee that the Exchange server is furthermore on the web.

To check this, we can use Outlook Web App (OWA). The effort to log in through OWA. This will help us with ensuring accepting there is some temporary connection issue.

If the login works successfully on OWA, taking everything into account, some other part is causing this error.

3: Make a New Outlook Profile

To decide error 0x8004010F, perceive the current space of the default Outlook data record, and a while later make another Outlook profile. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, To do this follow these methods:

Observe the default Outlook data archive

1. Select Start, and a short time later select Control Panel.
2. In Control Panel, select Mail.
3. In the Mail Setup – Outlook talk box, select Show Profiles.
4. Select the current Outlook profile, and thereafter select Properties.
5. In the Mail Setup – Outlook talk box, select Data Files.
6. Select the Data Files tab in the Account Settings talk box, and a short time later note the name and space of the default data report for the profile (a characteristic of endorsement will show the default data record).
7. Select Close.

4: Make another Outlook profile

Technique 1: Use an auto-record plan to make an IMAP or POP3 email account

Accepting the email server maintains both IMAP and POP3, auto record plan will make an IMAP record. We ought to follow the manual steps to make a POP3 account. Regardless, accepting the email server maintains ONLY a POP3. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, auto record game plan will make a POP3 account.

• Select Start, and thereafter select Control Panel.
• In the Mail Setup – Outlook trade box, select Show Profiles.
• On the General tab in the Mail trade box, select Add.
• In the New Profile trade box, type another profile name, and a while later select OK.
• In the Add New Account talk box, type the email account information, and a short time later select Next.
• Later the record is viably planned, select Finish.

Technique 2: Manually make an IMAP or POP3 email account

1. Select Start, and a short time later select Control Panel.
2. In the Mail Setup – Outlook talk box, select Show Profiles.
3. On the General tab in the Mail talk box, select Add.
4. In the New Profile talk box, type another profile name, and a while later select OK.
5. Then, at that point, in the Add New Account talk box, select Manually plan server settings or additional server types, and subsequently select Next.
6. Then, in the Choose Service talk box, select Internet E-mail, and a short time later select Next.
7. In the Internet E-mail Settings trade box, type the record nuances.
8. Select Test Account Settings to test your record. Contact your Internet expert association expecting you are unsure of the right record nuances.
9. Select Existing Outlook Data File, and a while later select Browse.
10. In the Open Outlook Data File trade box, examine to and a short time later select the Outlook data record you as of late found. Select OK.
11. Select Next.
12. In the Test Account Settings trade box, select Close.
13. Select Finish.

Related Article: Outlook 2013/2016 Offline on Startup

5: Plan the new Outlook profile as the default profile

To set the new Outlook profile as the default profile, follow these methods:

1. On the General tab of the Mail talk box, select Always use this profile.
2. Select the drop-down under Always use this profile, and a short time later select the new profile.
3. Select OK to close the Mail talk box.

Expecting that we have a couple of non-default .pst archives and need to recollect them for the Outlook profile, follow these methods:

1. Start Outlook.
2. On the File tab, select Open.
3. Select Open Outlook Data File.
4. Scrutinize to the envelope region that contains another .pst archive, select it, and thereafter select OK.

The as of late added. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, pst record will appear in the Navigation sheet.

6: Fix Old Outlook Profile

From time to time, changing the message development district to a temporary envelope and from there on transforming it back revives Outlook settings. This might repair the slip.

In this way, rather than making another Outlook profile, we could go for the means under to fix the OST record error:

• Go to File > Account Settings > Account Settings and from there on click Change Folder
• Click New Outlook Data File to make a succinct information document
• Enter a name for this new Outlook information record and from there on click OK
• At this point foster the subfolders and select Inbox facilitator
• Then, click OK to close the exchange box
• Once more, click on the Change Folder button
• Before long select the Original Inbox organizer information record by turning it into the subfolder. Then, at that point, click OK
• At this point click on the Data Files tab and take out the transient OST record that we made beforehand
• Close the Account Settings talk box and accordingly click ‘Send/Receive’ to be careful with the slim chance that the error 0x8004010F is settled

7: Adjust Firewall/Antivirus Settings

“Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, Firewall and antivirus programming may in like way concise Outlook information record can’t be gotten the opportunity to mess up.

Thusly, effort to empower association access for Outlook.exe chronicle in the antivirus or firewall network settings. The default ports are 25 for dynamic access and 110 for moving closer.

Learn How to Add OST File to Outlook, which allows users to work offline and sync changes when connected to the server.

8: Fix OST File

You may besides attempt to fix the OST record by utilizing the Inbox Repair device, for example, SCANPST.EXE. The device is organized in the establishment rundown of Outlook. To fix the OST record by utilizing SCANPST.EXE. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed” follow these strategies:

1: Explore to the going with area to find and transport off SCANPST.EXE

• C:\Program Files\Microsoft Office\root\Office\

2: At this point, click Browse and select the OST record. The default OST report area is:

• C:\Users\user\AppData\Local\Microsoft\Outlook

3: Click ‘Start’. Expecting that the instrument finds messes up, click the ‘Fix’ button to fix the issue with the OST report.

4: Once fixed, restart Outlook and tap on Send/Receive to check expecting Outlook is working and blunder is settled

9: Fix Outlook

As the last arrangement, we might effort to fix the Outlook establishment reports. We may also try to reinstall Outlook on the off chance that the help doesn’t work. “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, The properties to fix Outlook are as per the going with:

1. Open Control Panel and snap-on Programs > Programs and Features
2. Find and snap on Microsoft Office
3. Then, at that point, click Change
4. Eventually, select Repair and Continue and follow the help wizard
5. Later the upkeep, open Outlook and check to expect that the blunder is settled

Termination

Thusly, the “Sending Reported Error 0x8004010f Outlook Data File Cannot Be Accessed”, confusion up triggers because of various reasons like savage OST record. Wrong position arrangement, lacking read/structure endorsements, and so on. Today at arzhost.com, we supposed how our Hosting Expert Planners fix this screw-up.

Latest Posts:

• What Is The Difference Between Managed And Unmanaged VPS?
• What Can I Host on a VPS?
• Who Needs VPS Hosting?
• What are the Advantages of using VPS Hosting?
• Why Should I Choose VPS Hosting Over Dedicated Hosting?